Acrylic Signage with UV White Sticker Sabah — Drill Holes, Bolt Nut & Standoff Mounting, Custom Sizes & Thickness | Kota Kinabalu

Bolt and nut mounting uses a standard screw through the drilled corner hole, secured by a nut on the back — the sign sits flush against the wall. The screw head is visible on the front face. This is the most economical and straightforward option, suitable for functional signage such as room numbers, directional boards and safety notices. Standoff mounting (barrel spacer or dome screw) uses a chrome or brushed stainless steel cylindrical spacer that holds the acrylic panel away from the wall, creating a visible gap of typically 10–25mm. The barrel covers the screw head for a clean finish. This creates a floating, three-dimensional shadow effect that significantly elevates the visual quality of the sign — the preferred choice for reception areas, hotel lobbies, premium office nameplates and retail displays. Percetakan CCS in Kota Kinabalu, Sabah supplies acrylic signs with both mounting options.

Percetakan CCS in Kota Kinabalu will propose the correct thickness based on your sign dimensions — but as a general guide: 3mm suits small signs up to A3 with bolt or adhesive mounting; 5mm is the most popular choice for A3 to A1 signs and all standoff applications; 8mm is recommended for large panels above A1 where rigidity is important; 10mm and above is used for premium statement pieces, thick-edge plaques and architectural feature panels. For hotel room sign sets and corporate nameplate batches, 5mm with standoff is the industry standard. WhatsApp +60 10-503 7607 with your dimensions and we will confirm the ideal thickness.

UV white sticker printing uses a vinyl sticker with a white base layer applied to the back face of the acrylic. The white layer acts as an opaque backing that makes all colours appear vivid and true — without it, colours printed on clear acrylic would appear washed out or transparent. This method also allows the sticker to be replaced if the design needs to be updated without replacing the entire acrylic panel — making it a more flexible and cost-effective solution for signs that may need design refreshes. For applications requiring a fully permanent, scratch-proof print bonded directly to the acrylic surface, UV direct print (without sticker) is an alternative — ask Percetakan CCS in Kota Kinabalu at +60 10-503 7607 about both options.

Yes. Batch orders for hotel room number signs, apartment unit plates and hospital ward signs are a common order type at Percetakan CCS in Kota Kinabalu, Sabah. Provide your room number range, sign size and mounting preference — we will produce all units at consistent dimensions with standardised drill hole placement for uniform installation across all rooms. WhatsApp +60 10-503 7607 with your room count and size for a batch quote.

Custom acrylic sign production at Percetakan CCS in Kota Kinabalu, Sabah typically takes 2–3 weeks from artwork approval, depending on quantity, size and mounting hardware. Batch orders for hotel or apartment room signs may require additional time depending on volume. Rush orders may be available — WhatsApp +60 10-503 7607 to confirm your deadline.

Pricing depends on sign size, acrylic thickness, mounting hardware (no holes, bolt nut or standoff) and quantity. Standoff hardware carries a premium over bolt nut. Batch orders of 10 or more units reduce per-sign cost significantly. WhatsApp Percetakan CCS in Kota Kinabalu, Sabah at +60 10-503 7607 with your dimensions, thickness, hardware and quantity for a fast and accurate quotation.