UV Direct Print on Acrylic Sabah — Standard & Reverse Print (Anti-Scratch), HD Full Colour, Custom Size | Kota Kinabalu

Standard UV print applies artwork directly to the front face of the acrylic — the print is exposed on the surface and is visible immediately. Reverse print (also called back-print or second-surface print) applies the artwork mirror-flipped to the back face of the acrylic. When mounted on a wall, the glossy acrylic front acts as a permanent protective layer over the print — it cannot be scratched, cleaned off or damaged by daily contact. Reverse print produces a noticeably more premium finish and is the preferred method for any display that will be touched, cleaned or installed in high-traffic areas. Percetakan CCS in Kota Kinabalu, Sabah offers both methods on custom-size acrylic panels.

You can provide your artwork in normal orientation and specify that you want reverse print — Percetakan CCS in Kota Kinabalu will flip the artwork before printing. If you prefer to submit a pre-flipped file, that is also accepted. Either way, confirm clearly in your WhatsApp message that the order is for reverse print so there is no ambiguity before production begins.

Common acrylic thicknesses for UV print panels are 3mm (standard for most signage, display boards and menu panels), 5mm (heavier feel for reception displays and feature walls) and 8mm or above for premium statement pieces. Thicker acrylic gives a more substantial, high-end appearance — especially visible from the side edge. WhatsApp Percetakan CCS in Kota Kinabalu at +60 10-503 7607 with your application to confirm the recommended thickness for your project.

Yes. UV direct printing on acrylic reproduces photographs, detailed graphics, fine text and complex colour gradients with high definition. The smooth acrylic surface allows precise ink adhesion, producing sharper results than printing on textured materials. For photographic prints intended for gallery or premium display, submit the highest resolution source file available — a minimum of 150 DPI at the actual print size, or ideally 300 DPI. WhatsApp your file to Percetakan CCS in Kota Kinabalu at +60 10-503 7607 for a resolution check before production.

UV direct print on acrylic at Percetakan CCS in Kota Kinabalu, Sabah typically takes 2–3 weeks from artwork approval, depending on size, quantity and whether mounting hardware is included. Rush orders may be available — WhatsApp +60 10-503 7607 to confirm your deadline.

Pricing depends on panel size, acrylic thickness, print method (standard or reverse) and quantity. Reverse print carries a slight premium over standard front-face print. Larger panels and thicker acrylic cost more per unit. Percetakan CCS in Kota Kinabalu, Sabah provides custom quotes — WhatsApp +60 10-503 7607 with your panel size, thickness, print method and quantity for a fast and accurate quotation.