Colorbond Signage Sabah | Steel Base Aluminium Frame UV Sticker Print Outdoor Government Industrial
Specifications
Details
Colorbond Signage Sabah — Steel Base, Aluminium Frame, UV Sticker Print | Government, Industrial & Commercial
Colorbond steel base · Aluminium frame · UV sticker print · Custom sizes · Outdoor durable · Kota Kinabalu, Sabah
Base
Colorbond
steel panel
Frame
Aluminium
extrusion
UV sticker
full colour
Use
Outdoor
long-term
Sizes
Custom
dimensions
🔩 How It's Built — 3-Layer Construction
Colorbond Base
Pre-painted steel panel — rigid, weatherproof, rust-resistant. The structural foundation of the sign.
Aluminium Frame
Brushed aluminium extrusion borders the panel — adds rigidity, clean edge finish and mounting surface.
UV Sticker Print
Full colour UV-printed vinyl sticker applied to the Colorbond face — vibrant, weatherproof, long-lasting.
The combination delivers a signage system that is structurally rigid, weatherproof and visually sharp — suitable for permanent outdoor installation in Sabah's tropical climate.
✅ Why Colorbond — vs Foamboard, ACP or Plain Aluminium
💪 Structural Rigidity
Colorbond steel does not flex, bow or warp under heat and wind loading — critical for large outdoor signs in exposed locations. Outperforms foamboard and thin ACP at large sizes.
🌧️ Weatherproof
Pre-painted Colorbond steel is engineered for outdoor exposure — it resists rust, UV degradation and rain penetration in tropical climates. Designed to last years without structural failure.
🏛️ Government & Compliance Grade
Colorbond signage is the standard specification for government agency signs, military restricted area boards, utility infrastructure notices and JKR-standard roadside signage across Malaysia.
🎨 UV Sticker Surface
UV-printed vinyl over Colorbond produces vivid, sharp full colour output — including complex bilingual layouts, official insignia, icons and regulatory text — that holds colour outdoors for years.
| Sector | Common Sign Types | Examples in Sabah |
|---|---|---|
| Government | Kawasan larangan, restricted area, no entry, department nameboards, directional signs | JKR Sabah, Pejabat Daerah, Polis DiRaja Malaysia (PDRM), Tentera Darat |
| Utilities | No trespassing, electrical hazard, water catchment notices, pipeline warning boards | Sabah Electricity Sdn Bhd (SESB), SAINS, Lembaga Air Paip Sabah (LAPS) |
| Industrial | Safety signage, factory no-entry boards, site boundary markers, hazard warning signs | Sabah Ports, Sapangar Bay Container Port, palm oil mills, Tawau industrial zone |
| Plantations | Estate boundary signs, no burning notices, chemical storage warnings, estate office boards | Felda Sahabat, Sabah Softwoods, palm estates in Lahad Datu & Kinabatangan |
| Construction | Site safety boards, contractor nameplates, project info signs, hoarding signage | Construction sites across Kota Kinabalu, Putatan, Tuaran corridors |
| Commercial | Car park notices, property boundary boards, building management signs | Shopping mall management, residential developments, commercial property managers KK |
📄 Description
🌟 Key Features
- Colorbond pre-painted steel base — rigid, rustproof, weatherproof for tropical outdoor use
- Aluminium extrusion frame — clean edge, structural reinforcement, mounting-ready
- Full colour UV sticker print — sharp, vibrant, outdoor-durable graphics and text
- Handles complex layouts — bilingual text, official insignia, icons, regulatory content
- Custom sizes — small notices to large boundary and restricted area boards
- Government and compliance-grade construction
- Production typically 2–3 weeks from artwork approval
💡 Buyer Tips
- For government and military signage, confirm whether specific sign dimensions are mandated by the relevant ordinance or JKR specification before ordering custom sizes
- For bilingual or trilingual layouts (BM + English + Chinese), submit all text content in a Word or PDF document — our team can assist with layout before producing artwork
- Specify whether the sign will be wall-mounted, pole-mounted or freestanding — this affects the frame and footing configuration
- For plantation and industrial sites, specify if the sign will face direct salt air or chemical exposure — this may affect recommended surface coating
- Submit logos and crests (including government department logos) as vector files (AI or PDF) for sharp reproduction at large sign sizes
- For orders of 5 or more identical signs, WhatsApp for bulk pricing — unit cost reduces significantly at volume
🎯 Suitable For & Real-Life Examples
Government & Military
- Kawasan larangan boards for Kem Tentera Tawau, Tawau
- Restricted area signs for Polis DiRaja Malaysia (PDRM) district HQs, Sabah
- Department nameboards for Jabatan Kerja Raya (JKR) Sabah district offices
Utilities & Industrial
- Electrical hazard signs for Sabah Electricity Sdn Bhd (SESB) substations, KK
- No entry boards for Sabah Ports Authority, Sapangar Bay
- Pipeline warning signs for PETRONAS Sabah Gas Pipeline corridor
Plantations & Construction
- Estate boundary signs for Felda Sahabat palm estates, Lahad Datu
- Site safety boards for construction projects along Pan Borneo Highway, Sabah
- No burning notices for Sabah Softwoods timber concessions, Keningau
❓ Frequently Asked Questions
What is Colorbond and why is it used for outdoor signage?
Colorbond is a pre-painted steel product — a steel base with a factory-applied paint coating that makes it weather-resistant, rust-resistant and UV-stable. For signage, it provides a rigid, flat structural panel that does not warp, bow or flex under heat and wind loading — a critical requirement for large outdoor signs in Sabah's tropical climate. Unlike foamboard or thin ACP, Colorbond maintains its structural integrity over years of outdoor exposure. Combined with an aluminium extrusion frame and UV sticker print, it produces signage that meets government and industrial durability standards. Percetakan CCS in Kota Kinabalu, Sabah has been fabricating Colorbond signage for government agencies, utilities and industrial clients since 1991.
Can you produce kawasan larangan (restricted area) signs to the correct specification?
Yes. Percetakan CCS in Kota Kinabalu has produced kawasan larangan and restricted area signage for government and military premises in Sabah. These signs typically require bilingual text (BM and English), specific colour schemes (commonly red background with white text and graphics) and the relevant ordinance references printed as specified under Perintah Kawasan Larangan and Perintah Tempat Larangan. Submit the required text content, dimensions and any reference sign images to +60 10-503 7607 and we will prepare the artwork for your approval before production.
What mounting options are available?
Colorbond signage can be configured for wall mounting, pole mounting or freestanding installation with a ground footing. The aluminium frame includes structural mounting points. For pole or freestanding installation, a metal post and footing can be fabricated — specify your preferred mounting method when WhatsApping Percetakan CCS in Kota Kinabalu at +60 10-503 7607 so the correct configuration can be quoted.
How long does the UV sticker print last outdoors?
UV-printed vinyl stickers on Colorbond signage are rated for multi-year outdoor durability under tropical conditions — resisting UV fading, rain penetration and surface cracking. The Colorbond base provides a stable, non-porous bonding surface that prevents the adhesive from lifting or blistering. The aluminium frame further protects the sticker edges from peeling. Actual lifespan depends on sign orientation and exposure — signs in direct unshaded equatorial sun will age faster than sheltered signs. For maximum longevity, specify laminated sticker finish when ordering. WhatsApp +60 10-503 7607 for details.
How long does production take?
Colorbond signage production at Percetakan CCS in Kota Kinabalu, Sabah typically takes 2–3 weeks from artwork approval. Government and institutional orders requiring artwork sign-off may require additional time for the approval process on the client side. Rush fabrication may be available — WhatsApp +60 10-503 7607 to confirm your deadline.
How much does Colorbond signage cost in Sabah?
Pricing depends on sign size, quantity and mounting configuration. Larger signs and those requiring post or footing installation carry higher fabrication costs. Bulk orders of 5 or more identical signs reduce per-unit cost significantly. Percetakan CCS in Kota Kinabalu, Sabah provides custom quotes — WhatsApp +60 10-503 7607 with your sign dimensions, quantity, content and mounting requirements for a fast quotation.
Percetakan CCS — established in Kota Kinabalu, Sabah since 1991 — fabricates Colorbond signage using a Colorbond steel base + aluminium frame + UV sticker print construction. Rigid, rustproof and weatherproof for permanent outdoor use in tropical conditions. Suitable for government restricted area signs, military premises, utility hazard boards, industrial safety signage, plantation boundary signs and commercial property notices. Custom sizes. Wall, pole and freestanding mounting available. Production typically 2–3 weeks from artwork approval. WhatsApp +60 10-503 7607 with your sign dimensions and content for a fast quote.
Colorbond signage fabrication in Sabah — steel base, aluminium frame, UV sticker full colour print, custom sizes, outdoor weatherproof. For government, military, utilities, industrial and plantation use by Percetakan CCS, Kota Kinabalu. Established 1991. Page updated March 2026.
View more about Colorbond Signage Sabah | Steel Base Aluminium Frame UV Sticker Print Outdoor Government Industrial on main site